Jigs and fixtures
Miniature Pallet Rack Display
- Bounding box
- 244 × 155 × 300 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
"Design a 3D printable modular model of a miniature industrial pallet rack display system. Key Structure & Parts: 1. Upright Frames (Dark Blue): Two side frames with perforated vertical posts and diagonal V-shaped cross-bracing. 2. Horizontal Beams (Orange): Two shelf levels, each consisting of a pair of horizontal support beams (4 beams total), with end connectors attached to the blue upright posts. 3. Mini Wooden Pallets (Bege / Light Brown): 3 standard-sized mini Euro/US pallets placed on the rack beams. 1 wide extended mini pallet resting on the floor base underneath the rack. Style & Requirements: Designed as separate interlocking parts optimized for 3D printing (snap-fit assembly). High-detail industrial aesthetic. Color palette: Dark blue frames, bright orange beams, light brown/tan pallets."
Parameters
| Name | Value | Range |
|---|---|---|
| Frame height | 300 mm | 200 – 400 |
| Frame depth front-to-back | 120 mm | 80 – 200 |
| Frame plate thickness | 12 mm | 8 – 20 |
| Post width | 14 mm | 10 – 24 |
| Diagonal brace width | 9 mm | 6 – 14 |
| Post perforation diameter | 6 mm | 3 – 10 |
| Post perforation pitch | 25 mm | 15 – 50 |
| Beam length between frames | 220 mm | 150 – 300 |
| Beam square section | 18 mm | 12 – 30 |
| Beam centreline offset from rack centre | 28 mm | 15 – 45 |
| Lower shelf underside height | 60 mm | 30 – 150 |
| Upper shelf underside height | 200 mm | 120 – 280 |
| Mini pallet length | 80 mm | 50 – 120 |
| Mini pallet width | 60 mm | 40 – 100 |
| Pallet height | 12 mm | 8 – 25 |
| Wide pallet length | 160 mm | 100 – 220 |
| Wide pallet width | 70 mm | 50 – 110 |
| Deck board width | 10 mm | 5 – 20 |
| Pallet stringer width | 8 mm | 5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs