Jigs and fixtures
Mini PS5 Slim Stand
- Bounding box
- 100.0 × 70.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable stand for a miniature PlayStation 5 Slim replica (NOT a real PlayStation 5). Miniature PS5 dimensions: - Height: 200 mm - Width: 130 mm - Thickness: 60 mm Stand specifications: - Oval base: 100 mm long × 70 mm wide × 8 mm thick. - Two side supports, 22 mm high and 3 mm thick. - Slot width: 61 mm for a snug fit. - Four cylindrical locating pegs underneath the base, 8 mm diameter and 2 mm high. - Rounded edges. - Strong enough for PLA printing. - No supports required. - FDM 3D printable. - Separate parts if needed. - Style inspired by the official PS5 Slim stand.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length (X axis) | 100 mm | 50 – 150 |
| Base Width (Y axis) | 70 mm | 40 – 120 |
| Base Thickness | 8 mm | 4 – 15 |
| Support Height | 22 mm | 10 – 40 |
| Support Thickness | 3 mm | 2 – 8 |
| Slot Width (gap between supports) | 61 mm | 40 – 100 |
| Peg Diameter | 8 mm | 4 – 12 |
| Peg Height | 2 mm | 1 – 4 |
| Peg Spacing X | 60 mm | 20 – 120 |
| Peg Spacing Y | 40 mm | 10 – 80 |
| Fillet Radius | 1 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs