Jigs and fixtures
Microscope stand and 1W LED light bars (v2)
- Bounding box
- 320 × 200 × 312 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Printed stand for the S20 Ultra soldering microscope with 1W LED light wedges; v2 ties the upper post's joint tongue to its walls.
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 200 mm | 150 – 220 |
| Base depth | 200 mm | 150 – 220 |
| Base thickness | 8 mm | 5 – 15 |
| Post square size | 32 mm | 24 – 40 |
| Post wall | 4 mm | 2.4 – 6 |
| Each post section height | 150 mm | 100 – 200 |
| Joint tongue length | 20 mm | 10 – 30 |
| Arm reach, sleeve face to bolt | 70 mm | 40 – 120 |
| Arm width | 36 mm | 24 – 50 |
| Arm thickness | 16 mm | 10 – 24 |
| Carriage sleeve height | 50 mm | 35 – 80 |
| Carriage sleeve wall | 8 mm | 6 – 12 |
| Carriage position in assembly | 230 mm | 40 – 260 |
| Light wedge height | 60 mm | 40 – 90 |
| Light wedge length | 140 mm | 80 – 200 |
| LED bar slot width, fits 19-20 mm strip | 20.5 mm | 8 – 30 |
| Channel depth below diffuser | 10 mm | 5 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs