Jigs and fixtures
LUMA OPULENCE Privé
- Bounding box
- 71.4 × 124 × 9.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 38
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Instead of a sharp 90-degree intersection, the Galaxy S III used a remarkably large, sweeping corner radius (estimated around 12mm to 15mm depending on the exact point of the pebble-arc body symmetry). This means the curve begins much farther away from the actual corner of the device than it does on standard square phones.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 70.6 mm | 40 – 100 |
| Height | 124 mm | 80 – 180 |
| Thickness | 6.9 mm | 4 – 12 |
| Sweeping pebble corner radius | 13 mm | 3 – 20 |
| Outward end-curve depth | 1.2 mm | 0 – 3 |
| Bezel width | 1 mm | 0.5 – 3 |
| Display glass thickness | 0.7 mm | 0.3 – 1.5 |
| Punch-hole diameter | 3 mm | 2 – 6 |
| Punch-hole inset from display edge | 4 mm | 2 – 10 |
| Camera island width | 28 mm | 15 – 40 |
| Camera island height | 34 mm | 15 – 50 |
| Camera island thickness | 1.2 mm | 0.5 – 3 |
| Camera island corner radius | 6 mm | 2 – 12 |
| Camera island X position | 18 mm | 0 – 30 |
| Camera island Y position | 38 mm | 0 – 55 |
| Lens diameter | 14 mm | 8 – 20 |
| Lens bump height | 0.8 mm | 0.2 – 2 |
| Lens center spacing | 18 mm | 10 – 30 |
| Flash diameter | 4 mm | 2 – 8 |
| Flash bump height | 0.6 mm | 0.2 – 1.5 |
| Flash X offset | 10 mm | 0 – 15 |
| Flash Y offset | 12 mm | 0 – 15 |
| Button protrusion | 0.8 mm | 0.3 – 2 |
| Button height | 3 mm | 1 – 6 |
| Button overlap into body | 0.5 mm | 0.2 – 1.5 |
| Volume rocker length | 14 mm | 8 – 24 |
| Volume rocker Y position | 22 mm | -40 – 45 |
| Power button length | 9 mm | 5 – 18 |
| Power button Y position | 6 mm | -50 – 40 |
| USB-C width | 9 mm | 6 – 12 |
| USB-C height | 3 mm | 2 – 5 |
| USB-C depth | 8 mm | 4 – 15 |
| Speaker hole diameter | 1 mm | 0.6 – 2 |
| Speaker holes per side | 5 mm | 3 – 10 |
| Speaker hole spacing | 3 mm | 1.5 – 6 |
| Logo text size | 3 mm | 1 – 6 |
| Logo engraving depth | 0.6 mm | 0.3 – 1.5 |
| Logo Y position | -40 mm | -55 – -10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs