Jigs and fixtures
LilyGO T-Display S3 Vertical Stand
- Bounding box
- 34.7 × 79.6 × 74.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
make a vertical stand for lilygo t display s3 with usbc port and exaust on the back
Parameters
| Name | Value | Range |
|---|---|---|
| Board width | 68.5 mm | 50 – 120 |
| Board thickness with components | 7 mm | 3 – 15 |
| Board height | 26 mm | 20 – 60 |
| Board bottom center from front | 10 mm | 5 – 40 |
| USB-C center from bottom | 13 mm | 5 – 40 |
| USB-C opening size along edge | 12 mm | 8 – 20 |
| USB-C opening size across edge | 8 mm | 5 – 15 |
| Tilt angle from vertical | 15 deg | 0 – 30 |
| Wall thickness | 3 mm | 1.2 – 10 |
| Base height | 12 mm | 4 – 25 |
| Base depth | 30 mm | 20 – 80 |
| Back support length | 70 mm | 40 – 130 |
| Front lip height | 8 mm | 4 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs