Jigs and fixtures
Levitation Illusion Diorama
- Bounding box
- 100 × 60 × 88.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Design a magic illusion where a toy robot floats over a table. And then the magician starts to levitate too, standing next to the table.
Parameters
| Name | Value | Range |
|---|---|---|
| Stage length | 100 mm | 60 – 200 |
| Stage width | 60 mm | 40 – 150 |
| Stage thickness | 4 mm | 2 – 10 |
| Table height | 34 mm | 20 – 60 |
| Table top length | 46 mm | 25 – 100 |
| Table top width | 30 mm | 15 – 80 |
| Table top thickness | 4 mm | 2 – 10 |
| Table leg size | 4 mm | 2 – 10 |
| Robot hover gap | 20 mm | 5 – 60 |
| Magician hover gap | 12 mm | 3 – 60 |
| Levitation rod diameter | 3.5 mm | 2 – 8 |
| Cape thickness | 2 mm | 1.2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs