Jigs and fixtures
Lenovo X395 Laptop Cooling Lap Stand
- Bounding box
- 320 × 231.7 × 320 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
make lenovo x395 laptop stand in lap that uses 2 standard 120mm cooling fans. fans are going to be secured in place 3mm metal screws and nuts. make stand little upright and some stoppers at bottom of laptop so laptop dont fall off when in lap. fans will be operated allways when laptop is on so make sure air flow is good and when this is in my lap fans dont hit my legs or fingers.
Parameters
| Name | Value | Range |
|---|---|---|
| Width of laptop support | 320 mm | 260 – 400 |
| Depth of laptop support front-to-back | 230 mm | 200 – 300 |
| Front edge height above lap | 15 mm | 8 – 30 |
| Tilt angle | 12 deg | 5 – 25 |
| Material wall / rail thickness reference | 3 mm | 2 – 6 |
| Outer size of 120 mm fan | 120 mm | 80 – 140 |
| Fan body thickness | 25 mm | 10 – 40 |
| Fan corner screw spacing | 105 mm | 90 – 120 |
| Clearance hole for M3 screw | 3.4 mm | 2.5 – 4 |
| Air slot width - finger safe | 3.2 mm | 2.5 – 5 |
| Number of air slots per fan | 14 mm | 6 – 24 |
| Front stopper height above deck | 8 mm | 4 – 15 |
| Front stopper thickness along deck | 6 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs