Jigs and fixtures
L-Bracket Fixture
- Bounding box
- 50.0 × 40.0 × 50.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
give the fixture design for this
Parameters
| Name | Value | Range |
|---|---|---|
| Leg Length | 50 mm | 30 – 100 |
| Width | 40 mm | 10 – 80 |
| Thickness | 4 mm | 2 – 10 |
| Inner Fillet Radius | 2 mm | 0 – 4 |
| Hole Diameter | 5 mm | 2 – 10 |
| Hole Offset from End | 10 mm | 5 – 15 |
| Hole Spacing | 15 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs