Jigs and fixtures
Kerb Stone
- Bounding box
- 1000.0 × 180.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Kerb Stone (Types L1, L3, L4) Note: Exact sizes are missing in the quote, but you can use these standard sizes for 3D modeling: Standard Length: 100 cm (1 meter). Standard Cross-section (Width x Height): You can use 18x22 cm, 23x26 cm, or 15x18 cm. Shape Types: You can model two versions: Type A (Sloped kerb): Use a chamfered/sloped edge (for vehicles to drive over). Type B (Straight kerb): Use a straight, vertical block (to separate the road and sidewalk).
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 1000 mm | 200 – 2000 |
| Width (cross-section) | 180 mm | 100 – 300 |
| Height (cross-section) | 220 mm | 150 – 350 |
| Chamfer distance (slope) | 0 mm | 0 – 150 |
| Edge fillet radius | 5 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs