Jigs and fixtures
Hex-Base Phone Stand
- Bounding box
- 91.8 × 85.0 × 114.1 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
help me make a phone stand (80x60x100mm), with hexagonal base and phone base, a hole for a 20x20x30mm brushless motor for fan cooling, a flip out extendable part on the back to extend the base a bit , and a locking mech to lock it in place
Parameters
| Name | Value | Range |
|---|---|---|
| Base Across Flats | 80 mm | 40 – 160 |
| Base Thickness | 10 mm | 4 – 30 |
| Mounting Hole Dia | 4 mm | 2 – 8 |
| Base Corner Fillet | 2 mm | 0 – 5 |
| Backrest Width | 60 mm | 30 – 120 |
| Backrest Height | 100 mm | 50 – 200 |
| Backrest Thickness | 5 mm | 2 – 15 |
| Lean-Back Angle | 15 deg | 0 – 40 |
| Lip Height | 12 mm | 3 – 30 |
| Lip Depth | 10 mm | 3 – 30 |
| Motor Block Width | 30 mm | 20 – 60 |
| Motor Block Height | 30 mm | 20 – 60 |
| Motor Block Depth | 35 mm | 20 – 60 |
| Motor Bore (square) | 20 mm | 10 – 40 |
| Flange Thickness | 7 mm | 3 – 15 |
| Leg Length | 40 mm | 20 – 80 |
| Leg Width | 20 mm | 10 – 40 |
| Leg Thickness | 5 mm | 2 – 12 |
| Hinge Pin Hole Dia | 5 mm | 2 – 10 |
| Locking Pin Dia | 5 mm | 2 – 10 |
| Locking Pin Length | 20 mm | 10 – 40 |
| Pin Head Dia | 10 mm | 6 – 20 |
| Pin Head Height | 3 mm | 1 – 8 |
| Pin Fit Clearance | 0.4 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs