Fittings and adapters
Handlebar Grip
- Bounding box
- 38.0 × 38.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
A single handlebar grip for a two-wheeled electric scooter, approximately 120 mm long and 34 mm in outer diameter, made of matte black rubber. The grip has a slightly barrel-shaped profile with a gently raised middle for a comfortable fit in the palm. Its surface features fine, evenly spaced diamond-pattern anti-slip texturing and shallow grooves. Both ends have smooth, rounded transitions, with a narrow circular flange at the inner end and a rounded, closed end cap at the outer end. Show a soft rubber appearance with subtle surface grain. Include only the grip itself, without brake levers, buttons, mirrors, or any other components.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 120 mm | 80 – 160 |
| Maximum Outer Diameter | 34 mm | 30 – 45 |
| Handlebar Bore Diameter | 22 mm | 15 – 24 |
| Barrel End Radius Reduction | 1.5 mm | 0.5 – 2 |
| Flange Outer Diameter | 38 mm | 30 – 50 |
| Flange Thickness | 4 mm | 2 – 8 |
| Closed End Cap Thickness | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole