Fittings and adapters
Hammer Mill – 1 mm Powder with Outlet Duct Flange
- Bounding box
- 750.1 × 1372.1 × 1037.3 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
1 mm charcoal powder hammer mill with outlet transition duct and flange for cyclone/bag-filter connection
Parameters
| Name | Value | Range |
|---|---|---|
| Grinding chamber inner dia (tighter for fines) | 384 mm | 300 – 600 |
| Chamber length (between end plates) | 240 mm | 200 – 400 |
| Casing wall thickness | 8 mm | 4 – 16 |
| Feed opening length (along shaft) | 200 mm | 120 – 300 |
| Feed opening width | 220 mm | 120 – 300 |
| Hopper height | 280 mm | 150 – 450 |
| Main shaft dia | 60 mm | 40 – 80 |
| Rotor disc dia | 240 mm | 180 – 300 |
| Rotor disc thickness | 8 mm | 5 – 16 |
| Number of rotor discs | 5 | 3 – 7 |
| Hammer pin circle dia | 200 mm | 160 – 260 |
| Hammer pin dia | 16 mm | 10 – 24 |
| Number of hammer pins | 6 | 3 – 8 |
| Hammer length | 100 mm | 70 – 130 |
| Hammer width | 40 mm | 25 – 60 |
| Hammer thickness | 12 mm | 6 – 20 |
| Screen support grid hole dia | 20 mm | 10 – 30 |
| Screen support grid pitch | 28 mm | 24 – 50 |
| Fine mesh / sheet thickness | 1.5 mm | 1 – 3 |
| Outlet duct dia (to cyclone / bag filter) | 160 mm | 100 – 250 |
| Mill pulley dia (smaller = faster) | 200 mm | 150 – 350 |
| Motor pulley dia | 250 mm | 120 – 300 |
| Motor centre distance (horizontal) | 900 mm | 700 – 1300 |
| Bolt dia (M12 default) | 12 mm | 8 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Huawei Band Whoop Strap Adapter
i want to make whoop adapter for my huawei band 11 pro
SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Two-Loop Tesla Valve Fan Manifold
$fn=40; // WIFCO Tesla Valve Fan Prototype // Units: mm // PART: 0=lower, 1=upper, 2=fan adapter PART=0; L=220; W=224; H=150; S=75; module path(p,r=7){ for(i=[0:len(p)-2]) hul
Ninja 250R Turbo Manifold
I wish to make an exhaust to turbo manifold. It needs to be as short as possible going from a motorcycle engine of a 2008 ninja 250r into the turbo. These headers do not have to b
EX250 to VZ21 Short-Runner Turbo Manifold
I wish to make an exhaust to turbo manifold. It needs to be as short as possible going from a motorcycle engine of a 2008 ninja 250r into the turbo. These headers do not have to b
Bushed pin flanged coupling assembly
i want that bushed pin type flanged coupling as a assembly file.... please the measurement and design that assembly...ask me what else you want from me
