Jigs and fixtures
Half-Inch Stitch Sewing Guide
- Bounding box
- 130.0 × 34.0 × 7.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
I’m trying to build a sewing guide I want the guide to be able to be held in my hand or with my thumb and I need it to have a depth of 7 mm with markers for half inch stitches
Parameters
| Name | Value | Range |
|---|---|---|
| Depth (thickness) | 7 mm | 2 – 15 |
| Body length | 130 mm | 60 – 250 |
| Body width | 34 mm | 28 – 60 |
| Corner radius | 6 mm | 1 – 12 |
| Rim break radius | 0.8 mm | 0.2 – 2 |
| Thumb hole diameter | 22 mm | 10 – 24 |
| Thumb hole center from end | 20 mm | 13 – 60 |
| Stitch marker spacing (1/2 in) | 12.7 mm | 5 – 30 |
| V-notch depth | 3 mm | 1 – 6 |
| V-notch mouth width | 4 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs