Jigs and fixtures
Go-Kart Steering Rack
- Bounding box
- 300.0 × 16.0 × 16.5 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 300 mm | 200 – 500 |
| Width | 16 mm | 10 – 30 |
| Body Height (below teeth) | 12 mm | 8 – 30 |
| Rack Module | 2 mm | 0.5 – 4 |
| Pressure Angle | 20 deg | 14.5 – 25 |
| Tooth Count | 20 | 5 – 40 |
| Tie-Rod Hole Diameter | 8 mm | 4 – 16 |
| End Hole Offset | 15 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs