Jigs and fixtures
Folding Guitar Stand Side Panel
- Bounding box
- 175.0 × 18.0 × 430.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
foldable wooden guitar stand
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 430 mm | 250 – 700 |
| Base Depth (toe front to rear) | 175 mm | 90 – 320 |
| Panel Thickness | 18 mm | 10 – 30 |
| Top Edge Width | 55 mm | 25 – 120 |
| Top Rear Chamfer | 12 mm | 0 – 50 |
| Toe (Cradle Floor) Height | 72 mm | 30 – 150 |
| Cradle Vertex From Rear | 110 mm | 40 – 260 |
| Underside Arch Radius | 34 mm | 8 – 70 |
| Underside Arch Center | 72 mm | 15 – 200 |
| Carry Slot Length | 80 mm | 30 – 160 |
| Carry Slot Width | 18 mm | 8 – 45 |
| Carry Slot Center X | 38 mm | 10 – 120 |
| Carry Slot Center Height | 250 mm | 100 – 400 |
| Carry Slot Tilt | -8 deg | -45 – 45 |
| Hinge Hole Diameter | 8 mm | 3 – 20 |
| Hinge Hole X | 36 mm | 10 – 120 |
| Hinge Hole Height | 400 mm | 200 – 600 |
| Cross-Bar Hole Diameter | 6 mm | 2 – 16 |
| Cross-Bar Hole X | 86 mm | 20 – 200 |
| Cross-Bar Hole Height | 95 mm | 40 – 250 |
| Corner Fillet Radius | 8 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs