Jigs and fixtures
Flat-Pack Plywood Skateboard Rack
- Bounding box
- 4220.0 × 720.0 × 6.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
can you please creat a skatboard rack suitable for laser cutting. it should be a flat pack design that consists of flat 2d parts that fit together to create a 3d end result.
Parameters
| Name | Value | Range |
|---|---|---|
| Ply Thickness | 6 mm | 3 – 12 |
| Slot Clearance | 0.2 mm | 0.05 – 0.6 |
| Sheet Layout Gap | 40 mm | 10 – 200 |
| Side Panel Height | 720 mm | 400 – 1200 |
| Side Panel Depth | 360 mm | 200 – 800 |
| A-Frame Taper (per side) | 60 mm | 0 – 150 |
| Tab / Slot Height | 30 mm | 15 – 60 |
| Tab Protrusion | 12 mm | 8 – 30 |
| Clear Span Between Panels | 560 mm | 300 – 1200 |
| Rear Base Brace Height | 120 mm | 60 – 250 |
| Front Base Brace Height | 100 mm | 60 – 250 |
| Top Cross Rail Height | 80 mm | 40 – 200 |
| Board Support Rail Height | 70 mm | 40 – 200 |
| Front Brace Slot X | 40 mm | 10 – 200 |
| Rear Brace Slot X | 320 mm | 150 – 400 |
| Front Brace Slot Height | 50 mm | 20 – 200 |
| Rear Brace Slot Height | 60 mm | 20 – 200 |
| Lower Rail Slot X | 120 mm | 20 – 400 |
| Lower Rail Slot Height | 250 mm | 100 – 600 |
| Upper Rail Slot X | 280 mm | 20 – 400 |
| Upper Rail Slot Height | 430 mm | 200 – 680 |
| Top Rail Slot X | 180 mm | 20 – 400 |
| Top Rail Slot Height | 675 mm | 400 – 715 |
| Wheel Notch Count | 4 pcs | 0 – 10 |
| Wheel Notch Width | 8 mm | 3 – 20 |
| Wheel Notch Depth | 3 mm | 1 – 15 |
| Divider Length | 300 mm | 100 – 600 |
| Divider Height | 120 mm | 60 – 300 |
| Divider Straddle Slot X | 120 mm | 10 – 590 |
| Divider Straddle Slot Depth | 74 mm | 20 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs