Jigs and fixtures
Falling Building Ultrasonic Ping-Pong Catcher
- Bounding box
- 142.4 × 80.0 × 134.6 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
Im making a catcher to capture a ping pong ball. The ball is going to enter the building at 53.4 degrees which is why it is angled at 53.4 degrees. I need the catcher to look like a falling building. I also need it to fit a standard ardunio ultrasonic sensor inside the building So i can detect the ball enter. All the deminsions are on the image above.
Parameters
| Name | Value | Range |
|---|---|---|
| Lean Angle | 53.4 deg | 20 – 80 |
| Base Length | 100 mm | 60 – 200 |
| Base Width | 80 mm | 50 – 200 |
| Base Thickness | 8 mm | 4 – 20 |
| Building Width | 60 mm | 30 – 120 |
| Building Depth | 60 mm | 30 – 120 |
| Building Height | 120 mm | 50 – 250 |
| Wall Thickness | 4 mm | 2 – 10 |
| Ball Entry Diameter | 46 mm | 41 – 60 |
| Sensor Slot Width | 46 mm | 30 – 60 |
| Sensor Slot Height | 22 mm | 15 – 40 |
| Sensor Slot Depth | 10 mm | 5 – 30 |
| Sensor Z Offset | 20 mm | -30 – 50 |
| Base Overlap | 2 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs