Jigs and fixtures
Faceted Modular Desk Organizer
- Bounding box
- 450.0 × 110.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Refine the existing organizer CAD model while keeping all important dimensions and the magnetic system unchanged. Keep the base at 210 × 110 × 10 mm. Keep the existing surrounding wall, but make it slightly thicker, around 6–7 mm. Keep exactly 16 × 8×3 mm magnet positions with the same symmetric 4 × 50 × 100 mm grid. Do not move or change the magnet interface. Layout The base and every module must be separate, standalone parts. Do not stack the modules. Arrange them next to the base so every part can be viewed clearly. Exterior shape Give the OUTER side surfaces of the base and modules a subtle faceted / beveled geometry. The surfaces should have several very slight angled transitions instead of being completely flat. Keep the faceting subtle, smooth-looking and premium. Do NOT use decorative grooves, ribs or deep cuts. The faceted surfaces should create subtle highlights and shadows. Rounded edges Round the outer corners of the base. Round all outer edges of every module. Round all inner corners and inner edges of the modules. Use smooth fillets and gentle transitions wherever possible. No harsh or unnecessary sharp 90° edges. Important Keep the original functional dimensions, magnet positions, clearances and modular compatibility accurate. The final design should look like a premium modern product with subtle faceted surfaces and soft rounded edges, clean and minimalistic rather than overly decorative. Optimize the geometry for precise FDM printing in PLA.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 210 mm | 150 – 300 |
| Base Depth | 110 mm | 80 – 200 |
| Base Main Thickness | 10 mm | 6 – 20 |
| Raised Top Thickness | 1 mm | 0.5 – 3 |
| Base Rim / Wall Width | 6.5 mm | 4 – 15 |
| Module Wall Thickness | 8 mm | 4 – 12 |
| Module Bottom Thickness | 11 mm | 8 – 20 |
| Divider Wall Thickness | 8 mm | 4 – 12 |
| Module 1 Length | 100 mm | 50 – 150 |
| Module 1 Depth | 100 mm | 50 – 150 |
| Module 1 Height | 100 mm | 50 – 150 |
| Module 2 Length | 100 mm | 50 – 150 |
| Module 2 Depth | 100 mm | 50 – 150 |
| Module 2 Height | 80 mm | 50 – 150 |
| Magnet Diameter | 8 mm | 4 – 12 |
| Magnet Height | 3 mm | 1.5 – 6 |
| Magnet Inset from Edge | 7.5 mm | 2 – 20 |
| Magnet Cover Thickness | 1 mm | 0.5 – 3 |
| Gap Between Parts | 20 mm | 5 – 50 |
| Outer Rounding Radius | 3 mm | 0.5 – 6 |
| Inner Fillet Radius | 2 mm | 0.5 – 5 |
| Facet / Chamfer Size | 1 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs