Jigs and fixtures
Dual Track Rail 1410 mm
- Bounding box
- 92.0 × 1410.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
make a drawing for dual track spaning 1410 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Track Span | 1410 mm | 300 – 3000 |
| Channel Inner Width | 30 mm | 10 – 80 |
| Profile Height | 30 mm | 12 – 80 |
| Wall / Web Thickness | 4 mm | 2 – 10 |
| Centre Rib Width | 24 mm | 8 – 100 |
| Mounting Hole Dia | 6.5 mm | 3 – 14 |
| Mounting Hole Count | 7 pcs | 2 – 20 |
| End Margin | 100 mm | 20 – 400 |
| Top Edge Round-Over | 1.5 mm | 0 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs