Jigs and fixtures
Drill & Tap Jig Fixture
- Bounding box
- 160.0 × 110.0 × 78.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
DESIGN DRILING AND TAPPING FIXTURE FOR ATTACHED MODEL AND 2D DRAWING
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length | 160 mm | 100 – 260 |
| Base Plate Width | 110 mm | 80 – 200 |
| Base Plate Thickness | 15 mm | 8 – 30 |
| Mounting Hole Dia (M8) | 9 mm | 5 – 14 |
| Mounting Hole Inset | 12 mm | 6 – 25 |
| Workpiece Length | 70 mm | 30 – 140 |
| Workpiece Width | 40 mm | 20 – 110 |
| Workpiece Height | 30 mm | 10 – 70 |
| Locating Pocket Depth | 3 mm | 0.5 – 8 |
| Pocket Clearance | 0.4 mm | 0 – 2 |
| Post Diameter | 20 mm | 10 – 40 |
| Post Free Height | 53 mm | 30 – 100 |
| Post Spacing (X) | 100 mm | 60 – 160 |
| Post Inset From Rear Edge | 15 mm | 5 – 40 |
| Bushing Plate Thickness | 14 mm | 8 – 30 |
| Bushing Plate Width | 80 mm | 40 – 160 |
| Post Engagement In Plate | 8 mm | 3 – 15 |
| Bushing Outside Dia | 16 mm | 10 – 26 |
| Bushing Bore (M8 Tap Drill) | 6.8 mm | 3 – 20 |
| Bushing Length | 22 mm | 10 – 40 |
| Bushing Protrusion Below Plate | 4 mm | 0 – 15 |
| Number Of Bushings | 3 pcs | 1 – 5 |
| Bushing Pitch | 30 mm | 12 – 60 |
| Bushing Axis Position (Y) | 5 mm | -20 – 20 |
| Clamp Stud Dia (M10) | 10 mm | 6 – 16 |
| Clamp Stud Position (Y) | 40 mm | 28 – 48 |
| Clamp Strap Width | 24 mm | 12 – 45 |
| Clamp Strap Thickness | 10 mm | 5 – 20 |
| Clamp Strap Length | 50 mm | 30 – 90 |
| Clamp Nut Across Flats | 17 mm | 10 – 27 |
| Clamp Nut Thickness | 8 mm | 4 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs