Jigs and fixtures
DF30 Drum Trolley (200 L drum)
- Bounding box
- 892.5 × 782.0 × 1065.1 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a DF30 drum trolley for handling a standard 200-liter oil drum. Reproduce the real industrial design of the DF30: - A robust steel frame designed to hold one 200-liter drum. - The drum is positioned vertically. - Two large wheels at the rear. - One front swivel caster wheel. - A lower curved cradle/support that follows the rounded bottom shape of the drum. - A rear vertical frame/handle for pushing and maneuvering the trolley. - The drum must be securely supported and restrained by the frame. - Keep the structure simple, practical and suitable for industrial use. - Include the characteristic curved lower support of the DF30; do not replace it with a flat horizontal platform. - Do not add any dimensions yet. - Make the model fully parametric and editable so that I can add and modify all dimensions later. - Create the 3D model only; dimensions will be provided afterward.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Frame Length (X) | 720 mm | 500 – 1200 |
| Base Frame Width (Y) | 620 mm | 400 – 1000 |
| Frame Tube Section | 40 mm | 20 – 80 |
| Ground Clearance (underside of frame) | 140 mm | 120 – 300 |
| Drum Diameter | 580 mm | 300 – 800 |
| Cradle Band Height | 120 mm | 40 – 300 |
| Cradle Band Thickness | 6 mm | 3 – 20 |
| Cradle-to-Drum Clearance | 6 mm | 1 – 30 |
| Cradle Wrap Angle | 200 deg | 90 – 300 |
| Rear Wheel Diameter | 300 mm | 150 – 450 |
| Rear Wheel Width | 50 mm | 20 – 120 |
| Wheel-to-Frame Gap | 25 mm | 0 – 80 |
| Rear Axle Diameter | 20 mm | 8 – 40 |
| Swivel Caster Wheel Diameter | 125 mm | 60 – 200 |
| Caster Wheel Width | 40 mm | 20 – 100 |
| Swivel Post Diameter | 24 mm | 10 – 60 |
| Push Handle Height | 1050 mm | 600 – 1500 |
| Rear Post Tube Section | 40 mm | 20 – 80 |
| Handle Bar Diameter | 30 mm | 15 – 60 |
| Handle Grip Length | 120 mm | 40 – 400 |
| Mid Crossbar Height | 600 mm | 200 – 1000 |
| Mid Crossbar Diameter | 20 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs