Jigs and fixtures
Desk Flag Stand with Name Plate
- Bounding box
- 73.9 × 45 × 106.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
isim yazılan bayrak standı
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 70 mm | 40 – 160 |
| Base depth | 45 mm | 30 – 120 |
| Base height | 12 mm | 8 – 30 |
| Base corner radius | 5 mm | 0 – 15 |
| Pole diameter | 5 mm | 3 – 12 |
| Pole height above base | 90 mm | 50 – 200 |
| Flag width | 38 mm | 20 – 90 |
| Flag height | 24 mm | 12 – 50 |
| Flag thickness | 1.2 mm | 0.8 – 3 |
| Wave of the free flag edge | 2.5 mm | 0 – 8 |
| Name plate width | 56 mm | 30 – 130 |
| Name plate height | 30 mm | 15 – 70 |
| Name plate thickness | 1.2 mm | 0.8 – 3 |
| Name plate lean-back angle | 20 deg | 0 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs