Jigs and fixtures
Deck standoff bar (print x4)
- Bounding box
- 6 × 6 × 15 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Single square standoff bar (print 4x) to hold the ESP32 NodeMCU deck, 6x6x15 mm with M3 pilot hole through.
Parameters
| Name | Value | Range |
|---|---|---|
| Bar height | 15 mm | 6 – 40 |
| Bar square width | 6 mm | 5 – 12 |
| Vertical edge radius | 1 mm | 0.2 – 2 |
| Bottom/top edge chamfer | 0.4 mm | 0 – 1 |
| Pilot hole for M3 self-tap | 2.6 mm | 2.4 – 3.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs