Jigs and fixtures
Deck pin and push-on nut (print x4 each)
- Bounding box
- 19.0 × 7 × 26.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
3D-printable retaining pin (ratchet tip) and slotted push-on hex lock nut to hold the ESP32 deck on the 6x6x15 standoff bars; print 4 of each.
Parameters
| Name | Value | Range |
|---|---|---|
| Deck thickness | 3 mm | 1.5 – 6 |
| Standoff bar height | 15 mm | 6 – 40 |
| Chassis plate thickness | 3 mm | 1.5 – 6 |
| Pin head diameter | 6 mm | 4 – 10 |
| Pin head height | 1.5 mm | 1 – 3 |
| Pin shank diameter | 2.4 mm | 2 – 2.55 |
| Ratchet tooth root diameter | 2.2 mm | 1.8 – 2.4 |
| Ratchet tooth peak diameter | 2.5 mm | 2.2 – 2.55 |
| Nut thickness | 3 mm | 2 – 5 |
| Nut width across flats | 7 mm | 5.5 – 10 |
| Nut hole diameter | 2.3 mm | 2 – 2.5 |
| Spring slit width | 0.5 mm | 0.3 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs