Jigs and fixtures
ContraFlow CR-100 — Counter-Rotating Rim-Driven In-Pipe Hydro Generator
- Bounding box
- 360.0 × 220.1 × 344.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
ContraFlow CR-100 — Counter-Rotating Rim-Driven In-Pipe Hydro Generator. DN100 inline, two hubless counter-rotating rim rotors with NdFeB magnet rings running inside canned 27-slot/24-pole stators, water-lubricated SiC/PEEK bearings, stationary hub spine, inlet struts, outlet straightener, electronics pod, lab test stand. Gray/metal lab look.
Parameters
| Name | Value | Range |
|---|---|---|
| Rotor 1 blade count | 5 | 3 – 7 |
| Rotor 2 blade count | 4 | 3 – 7 |
| Blade stagger at hub (from axial) | 38 deg | 28 – 48 |
| Blade stagger at tip (from axial) | 66 deg | 56 – 72 |
| Wet radial gap (sleeve to can) | 1.5 mm | 1 – 2.5 |
| Stator slots | 27 | 21 – 33 |
| Stator housing cooling fins | 24 | 12 – 36 |
| Inlet strut count | 5 | 3 – 7 |
| Outlet straightener vane count | 7 | 5 – 9 |
| End flange OD | 220 mm | 215 – 235 |
| Electronics pod length (X) | 240 mm | 200 – 240 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs