Jigs and fixtures
Circular Display Stand
- Bounding box
- 40.0 × 40.0 × 4.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a circular display stand for miniature action figures with a 40mm base diameter and a 4mm height. Step the top face down by 1mm to create a recessed inner circle of 36mm diameter. Add two small 2mm diameter peg holes spaced 15mm apart in the center of the base. Ensure a flat bottom surface for bed adhesion.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 40 mm | 20 – 80 |
| Height | 4 mm | 2 – 20 |
| Recess Diameter | 36 mm | 10 – 38 |
| Recess Depth | 1 mm | 0.5 – 2 |
| Peg Hole Diameter | 2 mm | 1 – 4 |
| Peg Hole Spacing | 15 mm | 5 – 30 |
| Peg Hole Depth | 2 mm | 1 – 2.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs