Everything else
Models that do not fit a single category: assemblies, one-off parts and things people simply wanted to see built.
6915 models matchClear filters
Page 18 of 289
DeWalt raka spår 50 mm
Konvertering av befintlig batterihållare med raka 50 mm spår, bibehållet väggfäste.
Corona (Crown Gear) Support Bracket
Puedes crear un soporte para esa gorma y que sostenga una corona
Hex Head Bolt (M8)
What happened?
Laundry Basket Lift Cart - Assembled
각 부품들을 조합했을 때 완성본으로 모델링 다시 해줄래?
Minion Henry
build a minion character called Henry
Transformer Enclosure (Arched Top, Louvered, C14 Socket)
生成实心实体变压器外壳,外形尺寸:长270mm,宽192mm,高170mm。底部矩形,四角R15圆角,顶面向上圆弧拱起。右侧面有5条竖直百叶散热槽。背部中间有品字电源插座矩形缺口。顶部中间有黑色提手+两个固定底座。底部4个角附近有4个圆柱螺丝凸台。生成Brep实心模型,导出STEP。
Внутренняя разжимная оправка Ø800
Спроектируй устройство для зажима цилиндрической заготовки изнутри внутренним диаметром 800 мм, чтобы усилий зажима хватило для предотвращения сдвига детали от сил равных 5 кН
Sporran Pouch (Tangent-Circle Body)
From the bottom center of the sporran, measure up 3.5 inches. That is the center of a circle. The circle is the bottom boundary of the sporran. The sides of the sporran descend fro
CPC8-5 SMD Package
Create a CPC8-5 package model. Body Length (A) = 2.60 mm, Body Width (B) = 2.60 mm, Body Thickness (C) = 0.95 mm. It has 5 pins,pin1,pin2 ,pin3 and pin4 with the Lead Width(b) of 0
38 mm Watch Case (body, bezel, caseback, crown)
what is this
Gantry Inspection Frame
使用2020铝型材搭建龙门检测支架,单位mm。 1.左右两根竖直立柱:截面20×20,高度400mm,底部带防滑脚垫; 2.上方一根水平横梁,截面20×20,可以沿着立柱上下滑动,配锁紧滑块; 3.底部一块长方形电木底板,尺寸300×300mm,底板带T型槽,底板上有4个可滑动限位挡块,用于定位4/6/8寸圆形晶圆,挡块带硅胶缓冲垫; 4.横梁中心安装IMX
L Bracket with Mounting Holes
hole length is 5 mm
Rhomberg-Inspired Two-Door Cabinet
I'd like to replicate the Rhomberg Cabinet by John Reed Fox, then make some personal changes. Here is a picture of it: https://www.johnreedfox.com/rhomberg-cabinet
Henger (bemutató)
beszélsz magyarul?
Shark Denticle Sheet
I want you to make shark denticles like this
Cajón con tapa removible
haz la tapa
20L mATX Desktop PC Case
i want to build a desktop PC. the size is 20L. it can support mATX motherboard. It use PS2 power supplier. it has a 70mm*70mm*25mm rear axial system fan. CPU is up to 65W. Please h
Wind Turbine Blade with Hub
design a wind turbine blade connected to the hub directly
Rotor Blade + Compact Hub
reduce hub lenght by 75 percent
Drill Battery Adapter
could i upload you a photo?
ClickSystem_SoccerShoe_Sole
Erstelle einen 3D-CAD-Prototyp eines sicheren Klicksystems für eine austauschbare Fußballschuhsohle. 8 mechanische Verriegelungspunkte, selbstzentrierende Führung, zusätzliche Sich
DRIVEFLEX AIR 60A ESC
can you generate the cad of this esc?
Slotted Disc Wheel
undoo
Ganesh Coin on Jali Screen (STL-ready)
Stl
Showing 24 of 6915 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
