Everything else
Corona (Crown Gear) Support Bracket
- Bounding box
- 100.0 × 60.0 × 68.8 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Puedes crear un soporte para esa gorma y que sostenga una corona
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 100 mm | 60 – 220 |
| Base Width | 60 mm | 40 – 160 |
| Base Thickness | 8 mm | 4 – 25 |
| Mounting Hole Dia | 6.5 mm | 3 – 14 |
| Mounting Hole Inset | 12 mm | 6 – 40 |
| Base Corner Fillet | 3 mm | 0 – 8 |
| Rib Length | 90 mm | 40 – 200 |
| Rib Width | 14 mm | 6 – 40 |
| Rib Thickness | 12 mm | 6 – 40 |
| Crossing Angle | 90 deg | 30 – 150 |
| Frame Tilt (X look) | 45 deg | 0 – 90 |
| Hub Outer Dia | 60 mm | 50 – 120 |
| Hub Bore (shaft seat) | 40 mm | 12 – 45 |
| Hub Protrusion / side | 8 mm | 0 – 25 |
| Seat Counterbore Dia | 48 mm | 20 – 70 |
| Seat Counterbore Depth | 4 mm | 0 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm