Loading the interactive model…
Interactive 3D model of 38 mm Watch Case (body, bezel, caseback, crown)Everything else
38 mm Watch Case (body, bezel, caseback, crown)
1 views
- Bounding box
- 41.0 × 38.0 × 12.1 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- September 23, 2026
Download
Free to download and use. See the terms.
The prompt
what is this
Parameters
| Name | Value | Range |
|---|---|---|
| Case Outer Diameter | 38 mm | 34 – 44 |
| Case Height (TH) | 9.5 mm | 7 – 14 |
| Lug / Strap Width | 20 mm | 16 – 24 |
| Lug Overall Length (tip to tip, across) | 26 mm | 20 – 34 |
| Lug Corner Fillet | 3 mm | 0.5 – 6 |
| Caseback-side Chamfer | 0.5 mm | 0.1 – 1.5 |
| Dial Opening Diameter | 31 mm | 24 – 36 |
| Crystal Seat Diameter | 30 mm | 23 – 35.5 |
| Crystal Seat Depth | 0.8 mm | 0.3 – 2 |
| Movement Cavity Dia (set from Miyota 2035 dwg) | 26 mm | 18 – 32 |
| Movement Cavity Ceiling Height | 2 mm | 0.8 – 4 |
| Caseback Counterbore Dia | 30 mm | 20 – 34 |
| Caseback Counterbore Depth | 2 mm | 0.8 – 4 |
| Bezel Outer Dia | 37.6 mm | 33 – 44 |
| Bezel Aperture Dia | 31 mm | 24 – 36 |
| Bezel Thickness | 1.6 mm | 0.8 – 3.5 |
| Bezel Top Chamfer | 0.35 mm | 0.1 – 1 |
| Bezel Minute Markers | 60 pcs | 0 – 60 |
| Caseback Dia | 33 mm | 24 – 37 |
| Caseback Thickness | 1.2 mm | 0.6 – 3 |
| Caseback Locating Spigot Dia | 30.2 mm | 20 – 34 |
| Spigot Height | 1.5 mm | 0.5 – 3.5 |
| Crown Diameter | 6.5 mm | 4 – 9 |
| Crown Protrusion | 3 mm | 1.5 – 6 |
| Crown Embedment | 1.5 mm | 0.5 – 3 |
| Crown Flute Count | 12 pcs | 6 – 24 |
| Flute Cutter Radius | 0.9 mm | 0.4 – 1.5 |
| Crown Tube Boss Dia | 5 mm | 3 – 7 |
| Crown Tube Boss Length | 2 mm | 0.8 – 4 |
| Stem Passage Bore Dia | 2 mm | 0.8 – 3.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
STEPSTLGLB22 PARAMS
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
STEPSTLGLB20 PARAMS
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
STEPSTLGLB4 PARAMS