Everything else
Models that do not fit a single category: assemblies, one-off parts and things people simply wanted to see built.
6914 models matchClear filters
Page 10 of 289
4-pole RCD Circuit Symbol
Erstelle ein 4-poliges RCD-/FI-Stromlaufplansymbol im Stil einer modernen browserbasierten Stromlaufplan-App. Technische 2D-Vektoroptik, schwarze Linien, weißer oder transparenter
Updated Battery Mount
Internal width 56mm
Gypsum Trapezoid Stand for Glass Parallelepiped
гіпсова основа підставка під скляний паралепіпед. ця основа підставка має трапецевидну форму, з заглибленням по центру на 3 см. вся конструкція у висоту 10 см, у довжину 10 см, шир
Racing Pedal Assembly
design model of racing pedals. take inspiration from the photo.
Radial Aircraft Engine
create a aeroplan engine
Two Parallel Boards with Spacer Cylinder
把这两块板的长度都增加到1500mm。然后在两块板之间画一个圆柱体,长度为3035mm,两侧顶到两块平板。圆柱体直径为200mm,圆柱体的中心轴垂直于两个板,中心轴的高度距离地面为930mm,中心轴水平方向距离平板的垂直面200mm。
Swarm Satellite (Simplified)
Use this images to give me a step or prt file
Rotary PU Blade with Motor
ROTARY FOOD GRADE PU BLADE WITH MOTOR
Stepped Concentric Reducer
Create a precise, 3D-printable hollow PVC reducer made of two coaxial cylindrical sections. The upper cylinder must start directly above the lower cylinder, with no conical transi
Cam đĩa + con đội tịnh tiến
Tạo cho tôi cơ cấu cam biến chuyển động quay thành chuyển động tịnh tiến
Speaker Front Panel with Holes
生成一张矩形的音箱面板二维CAD线条工程图,带有尺寸标注。 基础参数:面板宽度150mm,高度168mm,厚度10mm。坐标系原点(0,0)设在面板的左下角。 孔位与尺寸要求: 1. 全频喇叭孔:在面板左下区域,圆心坐标(X=55, Y=55)。请打一个直径为74mm的贯穿通孔。 2. 高音喇叭孔:在面板右上区域,圆心坐标(X=95, Y=125)。请
Stepped Post with Top Groove and Tapped Holes
Make a 6” long rectangle with a width of 1” x 1.25”. Add a 1” long base with a width of 1.5” x 1.75”. Add a 1” long rectangle on top with a width of 2” x 1.75”. Add a 1” rad
Vial Reconstitution Base - Manual Drive
// RECONSTITUINTE DE FRASCOS 3ML - BASE MANUAL MECÂNICA $fn = 60; difference() { // Corpo principal externo da caixinha cube([110, 110, 30], center=false); // Ber
Flanged Bushing
Why ]
Speaker Baffle Panel (Rectangular, 2 Holes + Chamfer)
创建一个矩形音箱面板的三维实体模型。 基础尺寸:宽度150mm(X轴),高度168mm(Y轴),厚度10mm(Z轴)。原点(0,0,0)设在面板左下角前表面。 特征1 - 全频喇叭孔(内装):在面板上垂直居中打一个圆柱形贯穿通孔。孔的中心坐标为(X=75, Y=55)。直径74mm。在孔的正面(Z=10mm处)边缘,做一个2mm×45度的倒角。 特征2
Portable Cable Machine with Hexagonal Casing
generate a portable cable machine, which uses a 160mm brake rotor and a mechanical brake to provide resistance. the spool which the rope winds around should use a bungee cord. ever
Go-Kart Chassis
Go cart chassis
Assembled Speaker Cabinet (No Woofer/Tweeter)
Create full scale model of the speaker put together without woofers and tweeters. Completely redraw everything from scarth because your first try was incorrect. Consider multiple i
Propeller / Impeller Assembly
Prepare the drawing from the image with its dimensions.
Two-Step Level Platform
design a two steps level platform
Tornado Interceptor Wedge Anchor
Make a very aerodynamic tornado interceptor that has a low wedge shape and areas for nails to go in the ground
Remote Weapon System
I want a complete remote weapon system designe
Suporte de Mesa Eco Dot
Neste suporte não é possível fixar na parede nem esconder os cabos
Rectangular Block with Holes and Edge Fillets
fillet on the 4 sides 14.7mm of 0.5mm to remove the sharp edges
Showing 24 of 6914 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
