Loading the interactive model…
Interactive 3D model of Two Parallel Boards with Spacer CylinderEverything else
Two Parallel Boards with Spacer Cylinder
12 views
- Bounding box
- 1500.0 × 3075.0 × 1060.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
把这两块板的长度都增加到1500mm。然后在两块板之间画一个圆柱体，长度为3035mm，两侧顶到两块平板。圆柱体直径为200mm，圆柱体的中心轴垂直于两个板，中心轴的高度距离地面为930mm，中心轴水平方向距离平板的垂直面200mm。
Parameters
| Name | Value | Range |
|---|---|---|
| Board Length | 1500 mm | 100 – 3000 |
| Existing Board Thickness | 20 mm | 5 – 100 |
| Top Edge Height Above Ground | 1060 mm | 100 – 3000 |
| Face-to-Face Gap Between Boards | 3035 mm | 100 – 5000 |
| Parallel Board Thickness | 20 mm | 5 – 100 |
| Cylinder Diameter | 200 mm | 20 – 500 |
| Cylinder Length | 3035 mm | 100 – 5000 |
| Cylinder Axis Height From Ground | 930 mm | 0 – 2000 |
| Cylinder Axis Offset From Board End Face | 200 mm | 0 – 1500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS