733 models

Brackets and mounts

L-brackets, wall mounts, clamps and holders generated from text prompts. Every one shows the prompt that made it and downloads as STEP or STL.

Page 30 of 31

360 × 180 × 32 mm3D Printing

BOMBARDICUZ Mk I Modular Chassis Frame Prototype

Preliminary modular 360 x 180 mm central chassis deck for a 450 mm overall tracked rover. Two deck panels, four split longitudinal rails with adjustable slots, and three crossmembe

STLGLB11 PARAMS
3D preview of Robot Chassis Base200 × 200 × 4 mm3D Printing

Robot Chassis Base

Generate an OpenSCAD script for a 3D printable robot chassis base. The base must be a flat rectangular plate of exactly 200x200 mm with a thickness of 4 mm. Place the origin (0,0)

STLGLB31 PARAMS
75 × 181.2 × 121.4 mm3D Printing

Corrected curved column saddle — concealed strap bracket

Adjusted Corrected curved column saddle — concealed strap bracket: shelf_depth=177.8

STLGLB12 PARAMS
10.6 × 13.8 × 143.2 mm3D Printing

Minimalist Ballpoint Pen

A modern minimalist ballpoint pen, 140 mm total length. Main barrel: cylinder 10 mm diameter, 95 mm long, with a subtle 0.5 mm deep circumferential grip groove pattern (6 thin ring

STLGLB22 PARAMS
200 × 172.1 × 36.4 mm3D Printing

Trivoice 2.0 Secure Dual Enclosures - Speaker Retainer

Updated twin enclosure design preserving the four-corner screw-down lid system. DFPlayer is intended to sit directly on the breadboard and has no separate holder. Speaker cradle in

STLGLB13 PARAMS
581.0 × 31.9 × 40 mm3D Printing

Mini Companion Robot - Exploded Parts

A cute, friendly miniature humanoid companion robot, exactly 90 mm tall. White rounded futuristic body with blue accents, large rounded head, expressive OLED face area, two short a

STLGLB36 PARAMS
200 × 105 × 31 mm3D Printing

Trivoice 2.0 Final Enclosure - Base and Lid

Final two-piece Trivoice 2.0 enclosure: 170x60 breadboard with DFPlayer on it; separate SD reader holder on left opposite ESP32 on right; relay and MAX98357A holders between; horiz

STLGLB16 PARAMS
200 × 105 × 44.2 mm3D Printing

Trivoice 2.0 Mic Holder and 45x50 Speaker Mount

Update the Trivoice enclosure with a dedicated INMP441 microphone holder, separately labelled MIC, and a 50 x 45 mm speaker locating rim on the lid. Add four M3 clearance holes, ca

STLGLB13 PARAMS
13.5 × 13.5 × 20.7 mm3D Printing

HappyModel EX1103S Brushless Motor

Create a detailed and dimensionally accurate 3D CAD model of the HappyModel EX1103S brushless motor. The model must represent the complete motor assembly, including its outer rota

STLGLB21 PARAMS
212.8 × 175.9 × 20.6 mm3D Printing

Boîte outils biais couture v5 – clip intégré

Boîte pour 8 outils de biais (8 à 25 mm), charnières vis M3x25, fermeture à clip sans pièce mobile : lame souple horizontale intégrée à la façade (flexion dans le sens fort des cou

STLGLB29 PARAMS
3D preview of Bike Rear Radar Detector Case (ESP32 + mmWave, Twist-Lock Mount)64 × 48 × 29 mm3D Printing

Bike Rear Radar Detector Case (ESP32 + mmWave, Twist-Lock Mount)

i dont need the ring, i want twist-lock mount whjere i alreadt have the mont strap

STLGLB23 PARAMS
161 × 146.2 × 50 mm3D Printing

Speed Loader Main Frame

Generate a 3D parametric solid model of a speed loader main frame. Start with a central hub of 25mm outer diameter, 10mm thickness, and a 10mm center bore. Create 6 cylindrical cav

STLGLB22 PARAMS
136.6 × 99.3 × 60.9 mm3D Printing

Trappeholder til Makera-fræserrør

Adjusted Trappeholder til Makera-fræserrør: pocket_depth=22, step_h=12

STLGLB10 PARAMS
91.9 × 211.3 × 22.1 mm3D Printing

Realistic Poppy Grave Flag Stake (with inserts)

Remembrance Day ground-stake flag holder for 10x6 inch flags; realistic poppy built from coloured inserts that drop into a pocket so it pops

STLGLB11 PARAMS
200 × 105 × 31 mm3D Printing

Trivoice 2.0 Final Enclosure - Base and Lid

Final two-piece enclosure: 170x60 breadboard with DFPlayer located on it; separate SD reader holder on left opposite ESP32 at right; relay and MAX98357A holders between; horizontal

STLGLB16 PARAMS
190 × 196 × 161.1 mm3D Printing

Levenhuk Skyline Plus 120S Alt-Az Goto Mount

i want to make Alt-Azimuth goto mount for my levenhuk skyline plus 120s telescope. it will sit on top of standart tripod. it will be driven by two nema 17 motors.

STLGLB23 PARAMS
37.2 × 13.6 × 83.5 mm3D Printing

FTC Swappable Number Plate Holder

so I making a swapable number plate holder for ftc and need to something like where its swamapble the dimensions for the number plate is 6.5 lenght 2.5 width and 0.5 cm highht

STLGLB18 PARAMS
200 × 105 × 31 mm3D Printing

Trivoice 2.0 Final Enclosure - Base and Lid

Final enclosure with four aligned corner lid bosses, breadboard for DFPlayer and jumper/power wiring, side holders for SD reader, relay, MAX98357A and ESP32, plus lid speaker, butt

STLGLB16 PARAMS
116.8 × 116.8 × 43 mm3D Printing

S11 Mini Neo - Full Frame with PCB Connector Access

Revised parametric S11 Mini Neo frame with a true through-opening through the bottom floor for the underside 3-pin PCB connector, plus shallow clearance relief. Connector position

STLGLB30 PARAMS
200 × 13 × 20 mm3D Printing

Cyberdeck Lower Enclosure Shell

Create a rectangular cyberdeck lower enclosure shell measuring 300 mm wide by 250 mm deep by 45 mm tall with 3 mm thick walls, a flat solid bottom, and 4 mm rounded vertical corner

STLGLB37 PARAMS
44.3 × 20 × 21.3 mm3D Printing

Parallel Dual Pipe Clamp (15 mm pipes, 8 mm gap)

parallel dual pipe clamp for two 15mm pipes with 8mm gap

STLGLB11 PARAMS
112 × 104 × 124.5 mm3D Printing

ShopCam v3 – 3-part body, back cover, base puck

Consolidated, cleaner ShopCam: one body holding the ESP32-2432S028 display, ESP32-CAM (OV3660) + AM312 PIR as two 'eyes' above the screen with a fixed downward tilt, a vented BME68

STLGLB29 PARAMS
76.2 × 88.9 × 152.4 mm3D Printing

90 Degree L Bracket

Create a 90-degree L-bracket made from 0.1875-inch (3/16-inch) thick plate. The vertical plate is 3 inches wide and 6 inches tall, with two 0.45-inch mounting holes spaced 3.5 inch

STLGLB13 PARAMS
200 × 200 × 4 mm3D Printing

Robot chassis base

"Generate an OpenSCAD script for a 3D printable robot chassis base. The base must be a flat rectangular plate of exactly 200x200 mm with a thickness of 4 mm. Place the origin (0,0)

STLGLB36 PARAMS

Showing 24 of 733 models

Show 50 more

Describe a part, get a model

Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.