Brackets and mounts
S11 Mini Neo - Full Frame with PCB Connector Access
- Bounding box
- 116.8 × 116.8 × 43 mm
- Engine
- 3D Printing B-rep
- Parameters
- 30
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Revised parametric S11 Mini Neo frame with a true through-opening through the bottom floor for the underside 3-pin PCB connector, plus shallow clearance relief. Connector position and dimensions remain adjustable placeholders and must be aligned with the actual PCB before printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Central body length | 90 mm | 60 – 120 |
| Central body width | 30 mm | 20 – 50 |
| Lower chassis height | 9 mm | 6 – 16 |
| Structural wall thickness | 2 mm | 1.2 – 4 |
| Removable upper cover thickness | 2 mm | 1 – 4 |
| X motor coordinate absolute value | 36 mm | 25 – 50 |
| Propeller guard inner diameter - UNCONFIRMED | 40 mm | 25 – 60 |
| Propeller guard wall thickness | 2.4 mm | 1.6 – 4 |
| Propeller guard height | 12 mm | 8 – 20 |
| Structural arm width | 7 mm | 4 – 12 |
| Motor press-fit socket diameter - approximate | 6.1 mm | 5 – 8 |
| Motor socket depth | 12 mm | 6 – 17 |
| Motor wire exit hole diameter | 2.2 mm | 1.2 – 4 |
| Motor mount outer diameter | 11 mm | 8 – 16 |
| Battery length - UNCONFIRMED | 48 mm | 25 – 75 |
| Battery width - UNCONFIRMED | 20 mm | 10 – 35 |
| Battery thickness - UNCONFIRMED | 8 mm | 4 – 16 |
| Battery side clearance | 0.6 mm | 0.2 – 1.5 |
| Battery retaining wall height | 4 mm | 2 – 8 |
| Side retaining wall thickness | 1.5 mm | 0.8 – 3 |
| Front camera lens opening - verify | 8 mm | 4 – 14 |
| Generic sensor opening - placeholder | 3 mm | 1.5 – 8 |
| LED strip groove width | 2 mm | 1 – 4 |
| LED strip groove depth | 1.2 mm | 0.6 – 2.5 |
| Position of 3-pin underside connector - PLACEHOLDER | 0 mm | -40 – 40 |
| Position of 3-pin underside connector - PLACEHOLDER | 0 mm | -12 – 12 |
| Clear opening length - verify connector | 14 mm | 6 – 25 |
| Clear opening width - verify connector | 6 mm | 3 – 12 |
| Extra clearance around connector | 18 mm | 8 – 30 |
| Extra clearance around connector | 10 mm | 5 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and