Brackets and mounts
ShopCam v3 – 3-part body, back cover, base puck
- Bounding box
- 112 × 104 × 124.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 29
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Consolidated, cleaner ShopCam: one body holding the ESP32-2432S028 display, ESP32-CAM (OV3660) + AM312 PIR as two 'eyes' above the screen with a fixed downward tilt, a vented BME680 bay, and the 28BYJ-48 pan motor + home switch inside; a screw-on back cover that also holds the ULN2003 and clamps the camera; and a solid base puck with slide groove, D-shaft socket, home cam channel and 1/4-20 insert. 3 printed parts, PETG, Bambu P1P. v3.1: manifold fixes, front layout mirrored so the USB and lettering are correct.
Parameters
| Name | Value | Range |
|---|---|---|
| Body width | 112 mm | 104 – 130 |
| Body height | 104 mm | 100 – 125 |
| Body depth without cover | 58 mm | 54 – 70 |
| Corner radius | 8 mm | 3 – 14 |
| Side/top wall | 2.4 mm | 1.6 – 4 |
| Front face | 2 mm | 1.6 – 3 |
| Bottom wall, carries the motor | 4 mm | 3 – 6 |
| Front edge chamfer | 1.2 mm | 0 – 2.5 |
| Board length | 86.7 mm | 80 – 95 |
| Board width | 50 mm | 45 – 56 |
| Hole spacing, long | 77.8 mm | 70 – 84 |
| Hole spacing, short | 41.7 mm | 36 – 48 |
| Screen module height = standoff | 4.6 mm | 2 – 8 |
| Board lower edge above body bottom | 18 mm | 14 – 24 |
| Screen window width | 59 mm | 45 – 75 |
| Screen window height | 45 mm | 35 – 50 |
| Window shift, + = toward the USB end | 0 mm | -12 – 12 |
| USB centre above board lower edge | 15 mm | 8 – 30 |
| Camera downward tilt | 8 deg | 0 – 20 |
| Lens centre from camera board end | 11 mm | 6 – 20 |
| Lens hole | 11 mm | 8 – 14 |
| PIR lens hole | 10.4 mm | 8 – 14 |
| Slide ring radius | 26 mm | 20 – 28 |
| Home switch radius | 34 mm | 30 – 44 |
| Sensor bay width | 16 mm | 12 – 22 |
| Base diameter | 104 mm | 90 – 130 |
| Base height | 20 mm | 16 – 30 |
| 1/4-20 heat-set insert hole | 7.7 mm | 6 – 10 |
| Home cam channel depth | 7 mm | 4 – 9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and