10520031
Loading the interactive model…
Interactive 3D model of Trivoice 2.0 Final Enclosure - Base and Lid

Brackets and mounts

Trivoice 2.0 Final Enclosure - Base and Lid

1 views
Bounding box
200 × 105 × 31 mm
Engine
3D Printing B-rep
Parameters
16
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Final two-piece Trivoice 2.0 enclosure: 170x60 breadboard with DFPlayer on it; separate SD reader holder on left opposite ESP32 on right; relay and MAX98357A holders between; horizontal USB-C access on right. Lid has speaker locating rim, acoustic grille, circular M3 screw holes and round head seats, four button holes with reinforcement collars, and an INMP441 holder with aligned sound inlet perforations.

Parameters

NameValueRange
Outer length200 mm190 – 220
Outer width105 mm95 – 120
Base height31 mm27 – 40
Wall thickness2.4 mm1.6 – 4
Floor thickness2.4 mm1.6 – 4
Corner radius6 mm3 – 10
Breadboard length170 mm160 – 180
Breadboard width60 mm55 – 70
Lid screw boss diameter10 mm8 – 14
M3 self-tapping screw pilot hole2.5 mm2.2 – 3
Speaker long side50 mm45 – 60
Speaker short side45 mm40 – 55
M3 clearance hole3.4 mm3.2 – 4
Panel-mount button hole12.2 mm8 – 16
Horizontal opening width10.5 mm8 – 14
Opening height4.5 mm3 – 7

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Trivoice 2.0 Final Enclosure - Base and Lid - Free CAD Model (STEP, STL) | TextoCAD