Brackets and mounts
Levenhuk Skyline Plus 120S Alt-Az Goto Mount
- Bounding box
- 190 × 196 × 161.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
i want to make Alt-Azimuth goto mount for my levenhuk skyline plus 120s telescope. it will sit on top of standart tripod. it will be driven by two nema 17 motors.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate diameter | 190 mm | 120 – 260 |
| Base plate thickness | 10 mm | 6 – 20 |
| Tripod bolt clearance diameter | 9.5 mm | 6 – 12 |
| Tripod counterbore diameter | 18 mm | 12 – 30 |
| Tripod counterbore depth | 4 mm | 2 – 8 |
| Azimuth bearing column diameter | 40 mm | 20 – 60 |
| Azimuth bearing column height | 15 mm | 6 – 30 |
| Azimuth platform diameter | 180 mm | 100 – 260 |
| Azimuth platform thickness | 12 mm | 6 – 20 |
| Altitude arm center from mount center | 80 mm | 50 – 150 |
| Altitude arm thickness | 14 mm | 8 – 25 |
| Altitude arm width along telescope axis | 40 mm | 20 – 80 |
| Altitude arm height above platform | 120 mm | 60 – 200 |
| Altitude axis height above platform | 100 mm | 50 – 180 |
| Saddle width | 140 mm | 80 – 220 |
| Saddle thickness along telescope axis | 50 mm | 20 – 100 |
| Saddle block height | 80 mm | 50 – 160 |
| Telescope tube clearance diameter | 120 mm | 80 – 220 |
| NEMA 17 body square | 42.3 mm | 35 – 55 |
| Motor mounting hole spacing | 31 mm | 20 – 40 |
| Motor screw clearance diameter | 3.4 mm | 2.5 – 5 |
| Motor boss clearance diameter | 22.3 mm | 18 – 35 |
| Motor mounting plate thickness | 8 mm | 4 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
