Jigs and fixtures
Brush Cleaner with Lever Drain
- Bounding box
- 323.0 × 126.0 × 83.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
i want to make a brush cleaner with a system where when the water needed to be frop to bottom tray it use a lever mechanism froam left to right
Parameters
| Name | Value | Range |
|---|---|---|
| Top Tray Length | 200 mm | 100 – 400 |
| Top Tray Width | 100 mm | 50 – 200 |
| Top Tray Height | 50 mm | 20 – 100 |
| Top Tray Wall/Bottom Thickness | 3 mm | 1 – 6 |
| Drain Hole Diameter | 20 mm | 10 – 40 |
| Bottom Tray Length | 220 mm | 100 – 400 |
| Bottom Tray Width | 120 mm | 50 – 200 |
| Bottom Tray Height | 30 mm | 10 – 60 |
| Bottom Tray Wall/Bottom Thickness | 3 mm | 1 – 6 |
| Lever Rod Diameter | 6 mm | 4 – 12 |
| Lever Rod Length (Handle) | 100 mm | 50 – 200 |
| Mounting Block Thickness | 10 mm | 5 – 20 |
| Mounting Block Height (Y) | 20 mm | 10 – 40 |
| Mounting Block Height (Z) | 20 mm | 10 – 40 |
| Drain Flap Diameter | 22 mm | 15 – 40 |
| Drain Flap Thickness | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs