Jigs and fixtures
Book Trophy with Stand and Ball
- Bounding box
- 72 × 72 × 101.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Un trofeu sub forma unei cărți, cu stand , plăcută detașabilă personaliza bila. Pentru premiere
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 72 mm | 30 – 150 |
| Base height | 12 mm | 6 – 30 |
| Pedestal top diameter | 58 mm | 30 – 140 |
| Depth the book sits in the stand | 4 mm | 1 – 10 |
| Book width | 46 mm | 20 – 120 |
| Book thickness | 13 mm | 6 – 40 |
| Book height | 68 mm | 20 – 150 |
| Cover thickness | 2.2 mm | 1.2 – 5 |
| Ball diameter | 24 mm | 10 – 60 |
| Ball stem diameter | 8.4 mm | 3 – 20 |
| Socket depth in the book | 6 mm | 2 – 20 |
| Sliding clearance per side | 0.3 mm | 0.1 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs