Jigs and fixtures
Billboard Steelwork Model (1:120)
- Bounding box
- 201.5 × 12 × 12.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
I want a 2d fabrication plan of this billboard at fabrication standard
Parameters
| Name | Value | Range |
|---|---|---|
| Overall truss length | 200 mm | 80 – 400 |
| Truss depth between chord centrelines | 10 mm | 5 – 40 |
| Nominal bay length between verticals | 12.5 mm | 4 – 40 |
| Front/back face spacing | 6 mm | 3 – 20 |
| Chord & web member diameter | 1.6 mm | 1.2 – 4 |
| Mast square section | 4 mm | 2 – 12 |
| Base plate width in X | 16 mm | 8 – 40 |
| Base plate depth in Y | 12 mm | 6 – 30 |
| Base plate thickness | 1.6 mm | 1.2 – 6 |
| Face-to-face tie rod diameter | 1.6 mm | 1.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs