Jigs and fixtures
bedside_shelf
- Bounding box
- 158.8 × 264.8 × 29.2 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a bedside shelf made of two joined sections, printed as one piece. Section 1 — the tray: a rectangular block 150mm wide x 100mm deep x 15mm thick, with 4mm rounded corners. Cut a rectangular recessed slot in the top, 90mm long x 20mm wide x 12mm deep, for holding a phone. Add a U-shaped notch 15mm wide x 10mm deep in the back-left edge for a charging cable. Section 2 — the tongue: a flat tapered wedge, 250mm long, 150mm wide where it joins the tray, tapering to 80mm wide at the far end. Thickness starts at 18mm at the tray and tapers to 4mm at the tip. Join the tray and tongue along their shared 150mm edge with a smooth 8mm radius fillet at the internal corner. Flat single build orientation, no overhangs beyond 30 degrees, for FDM 3D printing
Parameters
| Name | Value | Range |
|---|---|---|
| Tray width | 150 mm | 80 – 300 |
| Tray depth | 100 mm | 60 – 250 |
| Tray thickness | 15 mm | 5 – 30 |
| Corner radius | 4 mm | 0 – 20 |
| Slot length | 90 mm | 50 – 180 |
| Slot width | 20 mm | 10 – 60 |
| Slot depth | 12 mm | 5 – 20 |
| Slot X center | 0 mm | -60 – 60 |
| Slot Y center | 50 mm | 20 – 80 |
| Notch width | 15 mm | 5 – 30 |
| Notch depth (from edge) | 10 mm | 5 – 50 |
| Tongue length | 250 mm | 120 – 500 |
| Tongue start width | 150 mm | 80 – 300 |
| Tongue end width | 80 mm | 40 – 200 |
| Tongue start thickness | 18 mm | 8 – 30 |
| Tongue end thickness | 4 mm | 1 – 15 |
| Internal fillet radius | 8 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs