Jigs and fixtures
Assembled Three-Panel LED Mirror
- Bounding box
- 3352.8 × 1727.2 × 43.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
Overall dimensions: standardise the width at 3,352.8 mm nominal and height at 1,727.2 mm nominal, or choose rounded manufacturing dimensions and apply them consistently. Wing dimensions: distinguish the full wingspan from the dimensions of each individual wing. Component quantities: remove or verify the negative quantities and state units clearly. CAD details: include readable dimensions, section references, tolerances where necessary and separate component drawings. Materials: identify the precise base materials, profiles, finish requirements, mirror specification and lighting components. Engineering status: label structural and installation details as preliminary until appropriately verified. File deliverables: specify whether the customer receives editable DWG/DXF files, a dimensioned PDF, 3D CAD files if applicable, and the manufacturing specification.
Parameters
| Name | Value | Range |
|---|---|---|
| Central Panel Width | 1672.8 mm | 1200 – 2200 |
| Wing Panel Width | 840 mm | 400 – 1200 |
| Panel Height | 1727.2 mm | 1000 – 2200 |
| Mirror Glass Thickness | 6 mm | 3 – 12 |
| Frame Profile Width | 40 mm | 20 – 60 |
| Frame Profile Depth | 20 mm | 10 – 40 |
| LED Strip Width | 12 mm | 5 – 30 |
| LED Strip Thickness | 3 mm | 1 – 10 |
| Hinge Length | 100 mm | 50 – 200 |
| Hinge Width | 60 mm | 30 – 120 |
| Hinge Thickness | 4 mm | 2 – 8 |
| Mounting Rail Length | 1200 mm | 600 – 1600 |
| Mounting Rail Width | 60 mm | 30 – 100 |
| Mounting Rail Depth | 20 mm | 5 – 50 |
| Mounting Hole Diameter | 6 mm | 3 – 12 |
| Mounting Hole Count | 4 | 2 – 10 |
| Driver Enclosure Length | 180 mm | 100 – 300 |
| Driver Enclosure Width | 80 mm | 50 – 120 |
| Driver Enclosure Height | 40 mm | 20 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs