Mechanical parts
Angled Handle Lever Linkage
- Bounding box
- 170.7 × 93.5 × 6.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 12, 2026
Download
Free to download and use. See the terms.
The prompt
Add a 3D Handle Lever part. It must be an angled bar with three holes. The main pivot hole attaches to the base frame. A second joint hole is placed exactly 40mm away to connect to the open end of the 60mm Middle Link. Extend the third section of the bar by 120mm past the joint hole to form the manual hand grip lever.
Parameters
| Name | Value | Range |
|---|---|---|
| Main Link Overall Length | 100 mm | 50 – 200 |
| Pin Hole Diameter | 8 mm | 3 – 20 |
| End Boss Diameter | 20 mm | 10 – 40 |
| Part Thickness | 6 mm | 2 – 20 |
| Bar Web Width | 12 mm | 4 – 40 |
| Middle Link Length | 60 mm | 20 – 150 |
| Middle Link Angle | 45 deg | -180 – 180 |
| Handle Pivot to Joint Distance | 40 mm | 20 – 100 |
| Handle Grip Length | 120 mm | 40 – 300 |
| Handle Bend Angle | 120 deg | 20 – 180 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con