Jigs and fixtures
Adjust-O-Stand Pipe Support GA (C10)
- Bounding box
- 740.0 × 300.0 × 800.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
Please provide me a cad of this test stand, I will send you another image for you to check how it looks like
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length (X) | 740 mm | 400 – 1200 |
| Base Plate Width (Y) | 300 mm | 150 – 600 |
| Base Plate Thickness | 15 mm | 6 – 40 |
| Base Anchor Hole Dia | 16 mm | 6 – 30 |
| Gusset Thickness | 12 mm | 5 – 30 |
| Gusset Height | 100 mm | 30 – 250 |
| Gusset Run-out | 110 mm | 40 – 260 |
| Column Diameter | 60 mm | 25 – 120 |
| Overall Height | 800 mm | 400 – 1400 |
| Adjustment Bar Dia | 24 mm | 10 – 60 |
| Adjustment Bar Length | 620 mm | 200 – 1100 |
| Adjustment Bar Height | 430 mm | 150 – 900 |
| Wing Nut Diameter | 44 mm | 15 – 120 |
| Wing Nut Thickness | 16 mm | 6 – 50 |
| V-Head Height | 150 mm | 70 – 320 |
| V-Head Width (pipe axis) | 150 mm | 60 – 300 |
| V-Head Plate Thickness | 12 mm | 5 – 40 |
| V Groove Depth (vertex height) | 30 mm | 10 – 100 |
| Roller Diameter | 45 mm | 15 – 120 |
| Roller Width | 30 mm | 10 – 100 |
| Nameplate Width | 220 mm | 60 – 500 |
| Nameplate Height | 80 mm | 30 – 200 |
| Nameplate Centre Height | 300 mm | 100 – 700 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs