Jigs and fixtures
5-Shelf Servo Drawer Rack
- Bounding box
- 140 × 110 × 211 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
I want to create a 5 shelves rack system there are 2 servo motors fixed at the bottom of shelf which controls which drower comes out and which goes in
Parameters
| Name | Value | Range |
|---|---|---|
| Overall rack width | 140 mm | 80 – 220 |
| Overall rack depth | 110 mm | 70 – 180 |
| Clear height of each drawer bay | 30 mm | 20 – 50 |
| Height of the bottom servo bay | 32 mm | 24 – 50 |
| Frame wall thickness | 5 mm | 2 – 10 |
| Shelf plate thickness | 4 mm | 2 – 8 |
| Base plate thickness | 5 mm | 3 – 10 |
| Drawer wall thickness | 2.5 mm | 1.2 – 5 |
| Clearance between drawer and frame | 1.5 mm | 0.3 – 4 |
| Drawer front inset from rack front | 2 mm | 0 – 10 |
| Servo body width | 23 mm | 10 – 40 |
| Servo body depth | 12.5 mm | 8 – 25 |
| Servo body height | 22 mm | 10 – 40 |
| Servo centre offset from rack centre | 30 mm | 0 – 100 |
| Servo horn length | 26 mm | 10 – 60 |
| Servo horn angle | 30 deg | 0 – 180 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs