Fittings and adapters
5 mL Oral Syringe Assembly
- Bounding box
- 40.0 × 40.0 × 110.4 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
Nominal capacity 5 mL Barrel internal diameter ~12 mm Required 5 mL plunger travel ~44.2 mm Barrel external diameter ~15 mm, subject to glass wall requirements Scale 0–5 mL Minor graduations 0.1 mL Major graduations 0.5 mL, numbered every 1 mL Tip Central oral/enteral-only tip Tip requirement Must not accept a hypodermic needle or Luer fitting Plunger Fully removable for cleaning Plunger seal Replaceable/removable food/medical-grade silicone Protective grip Removable bright silicone sleeve around glass barrel Finger grip Rounded/wide enough for one-handed dosing Materials Borosilicate glass + suitable polymer/silicone components Markings Permanent, high-contrast; not printed ink that wears off
Parameters
| Name | Value | Range |
|---|---|---|
| Tip Length | 10 mm | 5 – 20 |
| Tip Outer Diameter | 6 mm | 4 – 10 |
| Tip Inner Diameter | 3 mm | 1 – 5 |
| Cylinder Length | 85 mm | 60 – 120 |
| Barrel Outer Diameter | 15 mm | 12 – 20 |
| Barrel Inner Diameter | 12 mm | 10 – 16 |
| Graduation Start Offset | 5 mm | 0 – 20 |
| Plunger Travel Length | 44.2 mm | 30 – 60 |
| Mark Depth | 0.2 mm | 0.05 – 0.5 |
| Minor Mark Width | 0.5 mm | 0.2 – 1 |
| Major Mark Width | 1 mm | 0.5 – 2 |
| Numbered Mark Width | 1.5 mm | 1 – 3 |
| Mark Circumferential Length | 3 mm | 1 – 6 |
| Rod Total Length | 55 mm | 40 – 100 |
| Boss Length | 5 mm | 2 – 10 |
| Boss Diameter | 8 mm | 6 – 10 |
| Cross Width | 10 mm | 8 – 12 |
| Arm Thickness | 2 mm | 1 – 3 |
| Thumb Pad Diameter | 20 mm | 15 – 30 |
| Thumb Pad Thickness | 3 mm | 1 – 6 |
| Plunger Volume (Assembly Position) | 4 mL | 0 – 5 |
| Seal Outer Diameter | 12 mm | 10 – 14 |
| Seal Inner Diameter | 8 mm | 6 – 10 |
| Seal Thickness | 5 mm | 2 – 8 |
| Sleeve Inner Diameter | 15.2 mm | 14 – 18 |
| Sleeve Outer Diameter | 19 mm | 16 – 25 |
| Sleeve Length | 30 mm | 15 – 50 |
| Flange Outer Diameter | 40 mm | 30 – 60 |
| Flange Thickness | 3 mm | 2 – 6 |
| Flange Center Hole Diameter | 15.2 mm | 14 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Power Window Regulator Roller
Create a power window regulator roller with these dimensions: * Outside diameter: 24 mm * Overall width: 9.5 mm * Center hole diameter: 8 mm * Center hole radius: 4 mm * Groove di
Micrometer Expansion Tool
Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end