Jigs and fixtures
48x48 in Plasma Table Assembly (4040/4080, HGR15, NEMA 23)
- Bounding box
- 1433.0 × 1300.0 × 1238.6 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
48x48 inch cutting area Plasma Table made from 4040 alum extrusion with a 4080 gantry beam. use hgr15 rails and nema 23 stepper motors for x and y and a nema and ball screw for the z axis. put the Linear rails on outside of frame for y axis and 2 rails on front of gantry rail for x travel, put the rack on the bottom of the 4040 frame rail. put slats across table and 4040 legs that are 39 inches with 4040 roals conecting them near the bottom for support
Parameters
| Name | Value | Range |
|---|---|---|
| Outer frame size | 1300 mm | 800 – 2000 |
| 4040 extrusion size | 40 mm | 20 – 80 |
| Leg height | 990.6 mm | 600 – 1500 |
| Lower cross-rail length | 1220 mm | 800 – 1800 |
| Lower cross-rail height | 180 mm | 50 – 500 |
| HGR15 rail length | 1250 mm | 800 – 1800 |
| HGR15 rail section | 15 mm | 9 – 30 |
| HGR15 carriage length | 60 mm | 30 – 120 |
| HGR15 carriage width | 40 mm | 20 – 100 |
| HGR15 carriage height | 20 mm | 12 – 60 |
| 4080 gantry beam length | 1300 mm | 800 – 2000 |
| 4080 gantry beam width | 40 mm | 20 – 80 |
| 4080 gantry beam height | 80 mm | 40 – 160 |
| Y rack length | 1250 mm | 800 – 1800 |
| Y rack width | 20 mm | 10 – 40 |
| Y rack height | 20 mm | 10 – 40 |
| NEMA 23 frame size | 57 mm | 40 – 80 |
| NEMA 23 motor length | 56 mm | 30 – 120 |
| Y pinion diameter | 30 mm | 15 – 80 |
| Slat length | 1200 mm | 800 – 1600 |
| Slat width | 6 mm | 3 – 20 |
| Slat height | 40 mm | 20 – 80 |
| Slat spacing | 100 mm | 50 – 200 |
| Slat count | 12 pcs | 3 – 24 |
| Z-axis travel | 300 mm | 100 – 500 |
| Ball screw diameter | 16 mm | 8 – 30 |
| Torch mount diameter | 30 mm | 15 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs