Jigs and fixtures
24mm Atomizer & Drip Tip Stand
- Bounding box
- 80 × 80 × 20 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
24mm atomizer ve drip tip standı
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 80 mm | 50 – 140 |
| Base height | 20 mm | 10 – 40 |
| Edge chamfer | 1.5 mm | 0 – 4 |
| Atomizer diameter | 24 mm | 16 – 34 |
| Socket depth | 12 mm | 4 – 30 |
| Sliding fit per side | 0.25 mm | 0.1 – 0.5 |
| 510-pin clearance hole | 7.5 mm | 5 – 10 |
| 510-pin hole depth below socket | 5 mm | 2 – 12 |
| Drip-tip hole diameter | 11 mm | 6 – 18 |
| Drip-tip hole depth | 10 mm | 4 – 20 |
| Number of drip-tip holes | 6 mm | 3 – 12 |
| Drip-tip circle radius | 30 mm | 15 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs