Jigs and fixtures
21x41 Commercial Prep Sink
- Bounding box
- 1041.4 × 533.4 × 1093.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
https://www.vevor.com/commercial-sinks-c_10620/vevor-stainless-steel-prep-utility-sink-1-compartment-free-standing-small-sink-include-faucet-legs-21-x41-commercial-single-bowl-sinks-for-garage-restaurant-kitchen-laundry-nsf-certified-p_010241012860 can you create a cad part for this sink 21x41 inches
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width (41 in) | 1041.4 mm | 500 – 1500 |
| Overall depth (21 in) | 533.4 mm | 300 – 900 |
| Overall rim height (34 in) | 863.6 mm | 600 – 1200 |
| Bowl depth (10 in) | 254 mm | 100 – 400 |
| Bowl bottom thickness | 5 mm | 2 – 12 |
| Front rim width | 20 mm | 8 – 60 |
| Side rim width | 20 mm | 8 – 60 |
| Rear faucet deck depth | 80 mm | 30 – 200 |
| Backsplash height | 50 mm | 0 – 150 |
| Backsplash thickness | 20 mm | 6 – 40 |
| Leg outside diameter | 32 mm | 12 – 60 |
| Leg inside diameter | 24 mm | 6 – 50 |
| Leg center inset from edges | 60 mm | 20 – 150 |
| Foot pad diameter | 48 mm | 20 – 80 |
| Foot pad height | 8 mm | 2 – 20 |
| Shelf height above floor | 250 mm | 80 – 500 |
| Shelf thickness | 15 mm | 4 – 30 |
| Faucet base diameter | 50 mm | 20 – 100 |
| Faucet base thickness | 8 mm | 3 – 20 |
| Faucet height above deck | 220 mm | 80 – 400 |
| Faucet pipe diameter | 18 mm | 8 – 40 |
| Spout reach toward bowl | 140 mm | 40 – 300 |
| Spout drop below top | 40 mm | 10 – 100 |
| Handle height above deck | 50 mm | 20 – 120 |
| Handle bar length | 100 mm | 40 – 200 |
| Handle bar diameter | 14 mm | 6 – 30 |
| Handle knob diameter | 24 mm | 10 – 50 |
| Drain hole diameter | 50 mm | 20 – 100 |
| Drain flange diameter | 80 mm | 30 – 150 |
| Drain flange thickness | 3 mm | 1 – 10 |
| Drain pipe diameter | 45 mm | 20 – 100 |
| Drain pipe length below bottom | 40 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs