2" NPT-F to G1/2-M Adapter

1 views

Bounding box: 80.1 × 80.0 × 65.0 mm
Engine: Precision B-rep
Parameters: 10
Published: November 2, 2026

Download

Free to download and use. See the terms.

The prompt

I need the fitting that has one side with a 2" internal thread connection and on the other side a g1/2" external thread

Parameters

Name	Value	Range
Large End OD	80 mm	70 – 100
Large End Length	30 mm	20 – 40
Internal Thread Tap Drill ∅	63.5 mm	60 – 70
External Thread Major ∅	20.96 mm	15 – 25
Threaded Section Length	20 mm	10 – 30
Wrench Flats Width	70 mm	50 – 80
Hex Section Length	20 mm	10 – 30
Through-hole Diameter	15 mm	8 – 25
Chamfer large entry	2 mm	0 – 4
Chamfer small tip	1 mm	0 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

26.3 × 26.3 × 7.6 mmPrecision

SM1 to RMS Thread Adapter

thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.

STEPSTLGLB5 PARAMS

26 × 26 × 15 mm3D Printing

Shouldered Spacer 20/26 x 15

Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness

STLGLB6 PARAMS

40 × 40 × 15 mm3D Printing

Cylindrical D-Shaft Flange

Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan

STLGLB6 PARAMS

240.1 × 100.8 × 240.0 mmPrecision

Assembled Split Y-Pipe Joint with Bolted Flange

i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole

STEPSTLGLB16 PARAMS

24.0 × 24.0 × 9.5 mmPrecision

Power Window Regulator Roller

Create a power window regulator roller with these dimensions: * Outside diameter: 24 mm * Overall width: 9.5 mm * Center hole diameter: 8 mm * Center hole radius: 4 mm * Groove di

STEPSTLGLB12 PARAMS

25.0 × 25.0 × 170.1 mmPrecision

Micrometer Expansion Tool

Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly

STEPSTLGLB16 PARAMS