Mechanical parts
Wooden Bed Headboard
- Bounding box
- 1700 × 54 × 1351.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Change 48 screws
Parameters
| Name | Value | Range |
|---|---|---|
| Plank length / panel width between posts | 1600 mm | 800 – 2400 |
| Plank width, one board of the stack | 95 mm | 50 – 200 |
| Plank thickness | 20 mm | 10 – 40 |
| Number of stacked horizontal planks | 12 mm | 3 – 30 |
| Chamfer on the plank long edges | 1.5 mm | 0.5 – 4 |
| Panel set-back behind the frame front | 5 mm | 0 – 20 |
| Alternating depth offset for rustic look | 1.8 mm | 0 – 4 |
| Number of wood grain distress grooves per plank | 5 mm | 0 – 10 |
| Depth of wood grain distress grooves | 1.2 mm | 0.2 – 3 |
| Distressed wood knots and imperfections | 1 | 0 – 1 |
| Weathered edge nicks and wood splits | 1 | 0 – 1 |
| Number of vertical support battens | 4 mm | 2 – 8 |
| Batten width | 30 mm | 15 – 80 |
| Batten thickness | 20 mm | 10 – 40 |
| Show glue squeeze-out lines under back support battens | 1 | 0 – 1 |
| Total count of 4x35mm screws driven into back battens | 48 mm | 0 – 96 |
| Screw diameter | 4 mm | 3 – 6 |
| Screw length | 35 mm | 20 – 50 |
| Display assembly instruction banner | 1 | 0 – 1 |
| Square side-post timber size | 50 mm | 30 – 100 |
| Square top-rail timber size | 50 mm | 30 – 100 |
| Post length, floor to top of headboard | 1300 mm | 600 – 2200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.